Lexmark T630 - Output bin; Configure Bins

216
Using the printer menus
Then select the values:
See also:
Print media sizes and support
Output Bin
Purpose:
To specify the default bin for printed material.
Values:
Note: If a user-defined name is available, it is displayed instead of Bin <x>. The name is
truncated to 14 characters. If two or more bins share the same name, the name
only appears once in the Output Bin value list.
Configure Bins
Purpose:
To determine which output bin(s) the printer uses for a particular job.
Portrait Width =3.00–14.17 in. =76–360 mm
(8.5 in.*) (216 mm*)
Portrait Height =3.00–14.17 in. =76–360 mm
(14.00 in.*) (360 mm*)
Feed Direction =Short Edge*
=Long Edge
Standard Bin*
Bin <x>