94
Replacing the transfer roller
Replacing the transfer roller
Order a new transfer roller when light print, toner fog, or background shading appears on printed
pages. See Ordering supplies for information on ordering a transfer roller.
Complete the following steps to replace the transfer roller. Refer to the documentation that comes
with the transfer roller for detailed installation information.
1 Turn the printer off and unplug the printer power cord.
2 Open the front doors and remove the print cartridge.
3 Locate the used transfer roller on the lower floor of the print cartridge housing.
4 Pry the left side of the transfer roller up from its slot to loosen it. (Use any kind of small tool.)
To Next Page
Loading...
