226
Using the printer menus
Staple Prime Src
Purpose:
To specify the source you want the printer to use when it primes the stapler. Prime Stapler is selected
from the Job Menu. When a staple cartridge is replaced or a staple jam is cleared, the printer may
need to prime the stapler by stapling a sheet of paper several times.
Values:
Note: Staple Prime Source is displayed only when a finisher is installed.
See also:
Reset Active Bin
Offset Pages
Purpose:
To offset the output of each print job or each copy of a print job, making it easier to separate the
documents stacked in the output bin.
Values:
Note: Offset Pages is displayed only when a finisher is installed.
Utilities Menu
Use the Utilities Menu to print a variety of listings relating to available printer resources, printer
settings, and print jobs. Other menu items let you set up printer hardware and troubleshoot printer
problems.
Tray <x> (Tray 1*) Selects paper from the specified tray.
MP Feeder Selects paper from the multipurpose feeder.
Manual Pap Selects a sheet of paper inserted in the manual feed slot.
None* Stacks all sheets directly on top of each other.
Between Copies Offsets each copy of a print job.
Between Jobs Offsets each print job.
To Next Page
Loading...
