Lexmark T630 - Page 225

225
Using the printer menus
Multipage View
Purpose:
To determine the orientation of a multipage sheet.
Values:
See also:
Multipage Print
Multipage Border
Purpose:
To print a border around each page image when using Multipage Print.
Values:
See also:
Multipage Print
Staple Job
Purpose:
To set stapling as the default for all print jobs. (Select stapling from the printer driver if you want to
staple only specific jobs.)
Values:
Note: Staple Job is displayed only when a finisher is installed.
Auto* Lets the printer choose between portrait and landscape orientation.
Long Edge Sets the long edge of the paper as the top of the page (landscape).
Short Edge Sets the short edge of the paper as the top of the page (portrait).
None* Does not print a border around each page image.
Solid Prints a solid line border around each page image.
Off* Does not staple print jobs.
On Staples each print job sent to the printer.