90
Replacing the charge roll
Replacing the charge roll
Order a new charge roll kit when toner fog or background shading appears on printed pages. See
Ordering supplies for information on ordering a charge roll.
1 Turn the printer off and unplug the printer power cord.
2 Open the front doors and remove the print cartridge.
3 Pull the upper front door halfway down.
4 Locate the used charge roll above the area for the print cartridge.
5 Locate the label with an arrow on the right side of the housing. It is attached to the arm-like
tab.
6 Push the arm-like tab to the right to release the charge roll.
Ta b
To Next Page
Loading...
