243
Using the printer menus
Values:
The font name and font ID for all fonts in the selected font source are displayed. The font source
abbreviation is R for resident, F for flash, K for disk, and D for download.
See also:
Font Source
Point Size
Purpose:
To change the point size for scalable typographic fonts.
Values:
Point size refers to the height of the characters in the font. One point equals approximately
1/72 of an inch. You can select point sizes from 1 to 1008 in increments of 0.25 points.
Note: Point Size is only displayed for typographic fonts.
Pitch
Purpose:
To specify the font pitch for scalable monospaced fonts.
Values:
Pitch refers to the number of fixed-space characters in a horizontal inch of type. You can select a
pitch from 0.08 to 100 characters per inch (cpi) in increments of 0.01 cpi. For nonscalable
monospaced fonts, the pitch is displayed, but cannot be changed.
Note: Pitch is only displayed for fixed, or monospaced, fonts.
Symbol Set
Purpose:
To choose a symbol set for a specified font name.
R0 Courier 10*
1...1008 (in increments of 0.25 points)
12*
0.08...100 (in increments of 0.01 cpi)
10*
To Next Page
Loading...
