66
Using and loading the multipurpose feeder
8 Slide the width guide to the left until it lightly touches the stack of print media. Do not bend the
print media.
9 Select the source, size, and type from your software application and select print media size
and type from the printer operator panel.
a Make sure the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size
and MP Feeder Type) are set to the correct value for the print media you are loading. (See
Paper Size and Paper Type for detailed information about these settings.)
b Press Go to return to Ready.
Note: Software settings may override operator panel settings.
To Next Page
Loading...
