69
Using and loading the optional envelope feeder
3 Slide the width guide to the far right.
4 Flex a stack of envelopes back and forth and then straighten the edges on a level surface.
Press down the corners to flatten them.
Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps
them feed properly.
Note: When you load envelopes, do not exceed the maximum stack height of 64.7 mm
(2.55 in.). The envelope feeder holds a maximum of 85 envelopes (75 g/m
2
, 20 lb
bond).
To Next Page
Loading...
