111
Restoring Factory
Defaults
What this message means:
The printer is restoring the factory default printer settings. When factory default settings are
restored:
• All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted.
• All menu settings return to the factory default setting except:
– The Display Language setting in the Setup Menu.
– All settings in the Parallel Menu, Serial Menu, Network Menu, and USB Menu.
What you can do:
Wait for the message to clear.
See also:
Restoring factory default settings
Restoring Held
Job xxx/yyy
What this message means:
The printer is restoring held jobs from the hard disk.
Note: xxx represents the number of the job being restored.
yyy represents the total number of jobs to be restored.
What you can do:
•
Wait for the message to clear.
• Select the Abort Restore menu item in the Job Menu.
See also:
Holding a job in the printer
Serial <x>
What this message means:
A serial interface is the active communication link.
To Next Page
Loading...
