142
Paper Type
Purpose:
To identify the type of paper installed in each paper source.
Values:
First select a paper source:
Then select a value:
The Paper Type default for each envelope source is Envelope. The Paper Type default for each paper
tray is as follows:
Note: If a user-defined name is available, it is displayed instead of Custom Type <x>. The
user-defined name is truncated to 14 characters. If two or more custom types share
the same name, the name only appears once in the Paper Type value list.
Use this menu item to:
• Optimize print quality for the specified paper.
• Select paper sources through your software application by selecting type and size.
• Automatically link paper sources. Any sources containing the same type and size of paper are
automatically linked by the printer, if you have set the Paper Size and the Paper Type to the
correct values.
Tray <x> Type MP Feeder Type
Manual Pap Type Manual Env Type
Plain Paper Labels Preprinted Envelope
Card Stock Bond Custom Type <x> Colored Paper
Transparency Letterhead
Tray 1–Plain Paper MP Feeder–Custom Type 6
Tray 2–Custom Type 2 Manual Pap Type–Plain Paper
Tray 3–Custom Type 3
To Next Page
Loading...
