Lexmark W812 - Held Jobs May be Lost; Held Jobs May Not be Restored

99
Held Jobs may be
lost
What this message means:
The printer memory is too full to continue processing print jobs.
What you can do:
•
Press Go to clear the message and continue printing. The printer frees memory by deleting the
oldest held job and continues deleting held jobs until there is enough printer memory to
process the job.
• Press Stop to clear the message without deleting any held jobs. The current job may not print
correctly.
• Press Menu to open the Job Menu and cancel the current job.
• To avoid this error in the future:
– Delete fonts, macros, and other data stored in printer memory.
– Install more printer memory.
Note: The messages 37 Insufficient Memory and Held Jobs may be lost
alternate on the display.
See also:
Holding a job in the printer; 37 Insufficient Memory
Held Jobs may
not be restored
What this message means:
The printer memory cannot restore Print and Hold jobs from the printer hard disk.
What you can do:
Press Go to clear the message. Some of the Print and Hold jobs stored on the disk will not be
restored.
See also:
37 Insufficient Memory