71
4
Pull the card straight out of the connector.
5 Place the card in its original packaging, or wrap the card in paper and store it in a box.
6 Reinstall the access panel (see Reinstalling the system board access panel).
Removing an option card
Complete the following steps to remove an internal print server, USB/Parallel Interface Card, or hard
disk with adapter card.
WARNING: Option cards are easily damaged by static electricity. Touch something metal on the
printer before you touch an option card.
1 Remove the access panel (see Removing the printer system board access panel for help.)
2 Remove the screw from the metal plate that covers the connector slot, and then lift off the
plate.
Save the screw.
To Next Page
Loading...
