Lexmark W812 - Page 156

156
Parity
Purpose:
To select the parity for serial input and output data frames.
Values:
See also:
Technical Reference
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received
through the serial port requires it, regardless of the default printer language.
Values:
See also:
PS SmartSwitch; Printer Language
Even
Odd
None*
Ignore
On* Printer examines data on the serial interface and selects PCL emulation if the data indicates
that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to
process the job if PS SmartSwitch is On, or uses the default printer language specified in the
Setup Menu if PS SmartSwitch is Off.