22
5
Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges of the stack on a level surface.
6 Place the paper or specialty media against the back of the tray.
If loading letterhead, insert the letterhead face up, with the top of the page facing the right side
guide.
Do not load bent or wrinkled paper.
7 Slide the side guides until they lightly touch the stack of paper.
8 Squeeze the front guide lever and slide it back until it touches the stack of paper. The guide
should be aligned with the correct indicator for the paper size loaded.
Make sure the edges of the paper fit underneath the extension on the front guide.
WARNING: Do not exceed the maximum stack height indicated on the tray. Overfilling the tray
may cause jams.
To Next Page
Loading...
