25
4
Pull the extension out until it stops.
5 Slide the locking mechanisms outward to lock the extension in place.
6 Follow steps 3 through 10 beginning on page 21 to finish loading the tray.
7 Adjust the paper size dial to match the size of the paper loaded in the tray.
If the dial is not set correctly, you may get a paper jam or 34 Wrong Paper Size message
8 Select the paper type and paper source from your software application.
Note: If you installed an optional 250-sheet paper tray but are unable to select it from your
printer driver, select the printer configuration or installed options tab in your printer
driver and highlight the 250-sheet tray option, which tells your computer an optional
tray is installed.
9 Press Go to start your print job.
To Next Page
Loading...
