10
Loading specialty paper
Follow these guidelines when loading specialty paper:
Load up to: Make sure:
10 envelopes • The print side faces you.
• The envelopes are loaded
vertically against the right
side of the paper support.
• The stamp location is in the
upper left corner.
• The paper guide is against
the left edge of the
envelopes.
10 greeting cards,
index cards,
postcards, or photo
cards
• The print side faces you.
• The cards are loaded vertically against the right side of
the paper support.
• The paper guide is against the left edge of the cards.
25 sheets of
coated, photo, or
glossy paper
• The glossy or coated side faces you.
• The paper guide is against the left edge of the photo
paper.
10 transparencies • The rough side faces you.
• The paper guide is against the left edge of the
transparencies.
100 sheets of
custom size paper
• The print side faces you.
• Your paper size fits within these dimensions:
Width
76 mm to 216 mm
3.0 in. to 8.5 in.
Length
127 mm to 432 mm
5.0 in. to 17.0 in.
• The paper guide is against the left edge of the paper.
25 iron-on transfers • You follow the loading instructions on the iron-on
packaging.
• The print (blank) side faces you.
• The paper guide is against the left edge of the iron-on
transfers.
To Next Page
Loading...
