19
Copying
You can make copies both when your All-In-One is connected to a
computer and when it is not connected to a computer.
To copy a document:
1 Load paper in the paper support.
2 Load your document in the document support. For help, see
page 11.
3 Press Copy.
4 Press the keypad buttons to select the number of copies.
Note: You can make up to 100 copies at a time using your
All-In-One. The default is one copy.
5 Press Start/Yes.
Changing the copy settings
Use the operator panel or the software to change the quantity, copy type,
contrast, size, and paper type.
Using the operator panel Using the software
1 Press Copy, and then press Menu
repeatedly to review the copy
settings.
2 Press Options to change the
settings.
1 Make sure you have installed the
All-In-One software. For help, see
page 1.
2 Click Start Programs Lexmark
X125 Lexmark X125 Settings
Utility.
3 Click copy.
4 Adjust the settings, and then click
OK.
To Next Page
Loading...
