23
Troubleshooting
Checking first things first
If your All-In-One has a problem, first make sure:
• The power cord is plugged into your All-In-One and into a properly
grounded electrical outlet.
• Your telephone cord is securely attached to the line jack on your
All-In-One and to the wall jack.
• Your telephone has a dial tone.
• The operator panel and the cartridge access door are both
completely closed.
• Ready appears on the display.
• The sticker and transparent tape covering the bottom of the
cartridges are removed.
Setup troubleshooting
When I inserted the installation software CD, nothing
happened.
1 Close all open programs.
2 Restart your computer.
3 Make sure you click Cancel on any screens similar to the one in
step 3 on page 1.
4 Eject, and then reinsert the installation software CD.
5 From your desktop, double-click My Computer.
6 Double-click your CD-ROM drive icon. If necessary, double-click
setup.exe.
7 Continue with step 4 on page 1.
To Next Page
Loading...
