22
Changing the scan settings
You can use the operator panel and the software to change the scan type,
contrast, size, and file type:
OCR (Optical Character Recognition)
Your All-In-One includes OCR software that converts a scanned document
into a file you can edit with a word processor. Access the OCR software
from your computer, or press Scan on the operator panel.
Here is an example of how to use OCR:
1 From the Settings Utility, select a Scan To application, such as
WordPad.
2 Select.txt as your file type.
3 Load your document into the document support.
4 Press Scan on the operator panel.
Your document is scanned, converted to text by the OCR software, and
loaded into your selected word processing program.
Note: You can use the OCR software to convert typed
documents, but not handwritten ones.
Using the operator panel Using the software
1 Press Scan, and then press Menu
repeatedly to review the settings.
2 Press Options to change the
settings.
1 Make sure you have installed the
All-In-One software. For help, see
page 1.
2 Click Start Programs Lexmark
X125 Lexmark X125 Settings
Utility.
3 Click scan.
4 Adjust the settings, and then click
OK.
To Next Page
Loading...
