26
Solving fax problems
The numbers stored in the Speed-dial memory do not dial
correctly.
Make sure the numbers are stored in the speed-dial memory correctly. To
print a speed-dial list:
1 Press Setup.
2 Press Menu until you see Print Report.
3 Press Options until you see Speed Dial List.
4 Press Start/Yes to print the list.
The All-In-One cannot receive faxes automatically.
Make sure your fax receive mode is set to either Ans/Fax or Fax. For help,
see page 17.
The All-In-One cannot receive faxes manually.
Make sure you do one of the following:
• Press Start/Yes twice on the All-In-One operator panel.
• Press *9* on your telephone, and then hang up.
Other fax transmission problems
The machine sending you a fax or the machine you are sending a fax to
may be turned off, out of paper, or disabled. Contact the owner of that
machine if you experience the following problems:
• Your All-In-One will not send a fax.
• Incoming faxes are incomplete.
• Incoming faxes have blank spaces.
• Incoming faxes have spots.
• Incoming faxes are of poor quality.
• Incoming faxes have stretched words.
• Your All-In-One dials a number, but cannot make a connection with
another fax machine.
To Next Page
Loading...
