27
Solving copy problems
PC Not Available appears on the operator panel display
Most of the time, when PC Not Available appears on your operator panel
display, you are attempting to make multiple copies while your All-In-One is
set to a color copy mode.
If you would like to make multiple black and white copies without a
computer, you can change the color mode to Black Draft, Black Normal, or
Black Photo using the menus on your operator panel display.
If you would like to make multiple color copies, you must attach your
All-In-One to your computer using a USB cable.
• If you have installed the All-In-One software on your computer, click
Start Programs Lexmark X125 Settings Utility. Use the
Lexmark X125 Settings Utility to change the copy settings.
• For All-In-One CD software installation instructions, see page 1.
Contacting Lexmark
Visit our Web site at www.lexmark.com to:
• Register your printer.
• Access publications for your printer.
• Check for upgrades.
• Create and print fun computer projects.
Visit our Web site at http://support.lexmark.com to receive technical
support.
To Next Page
Loading...
