Diagnostic Information 2-1
4412-00X
2. Diagnostic Information
Start
Power-On Self Test (POST) Sequence
1. Power Up Please Wait is displayed on the LCD.
2. Carrier moves to the left and the paper feed motor runs then
stops.
3. Carrier returns to the right.
4. Ready, ANS/FAX, and the Date and Time display when POST is
complete.
If your printer completes POST with no errors, go to the “Symptom
Tables” on page 2-3. Locate the symptom and take the indicated
action.
If your printer does not complete POST, locate the symptom in the
following table and take the indicated action.
To Next Page
Loading...
