2-14 Service Manual
4412-00X
Paper Path Service Check
Examine the machine for the following before you begin this service
check:
• Check the entire paper path for obstructions.
• Be sure the correct type of paper is being used.
• Be sure the printer is installed on a flat surface.
FRU Action
1 Large and Small
Feed Rollers
Check for wear and binds.
2 Small Feed Roller
Springs
Check for damage or disconnected springs.
3 Auto Sheet
Feeder Assembly
Check the pick roller for wear.
4 Mid Frame Asm Check the following for wear:
• Exit roller
• Star rollers
5End-of-Forms
Flag
Check for binds or damage.
6 White Roller
Assembly
Check for correct installation. Check gear and
bushings for damage. If damaged, replace. Go to
the “CIS White Roller Assembly Removal” on
page 4-4.
To Next Page
Loading...
