5 Unpack the new photoconductor kit. Be careful not to touch the photoconductor drum.
Warning—Potential Damage: When replacing a photoconductor kit, do not leave it exposed to direct light for
an extended period of time. Extended light exposure can cause print quality problems.
6 Insert the toner cartridge into the photoconductor kit by aligning the rollers on the toner cartridge with the tracks.
Push the toner cartridge until it clicks into place.
7 Install the unit into the printer by aligning the arrows on the guides of the unit with the arrows in the printer.
Push the unit as far as it will go.
Maintaining the printer
155
To Next Page
Loading...
