Lexmark X364dn - Make Sure Downloaded Fonts Are Supported; Clipped Images; Gray Background; Ghost Images

Clipped images
These are possible solutions. Try one or more of the following:
CHECK THE GUIDES
Move the width and length guides in the tray to the correct positions for the paper size loaded.
CHECK THE PAPER SIZE SETTING
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel Paper menu, check the Paper Size setting.
2 Before sending the job to print, specify the correct size setting:
• For Windows users, specify the size from Print Properties.
• For Macintosh users, specify the size from the Page Setup or Print dialog.
Gray background
• For Windows users: From Print Properties, select a different Toner Darkness setting before sending the job to
print.
• For Macintosh users: From the print options, Copies & Pages, or General pop-up menu, choose Printer Features,
and then choose the setting needed from the Toner Darkness pop-up menu.
• From the printer control panel Quality menu, select a different Toner Darkness setting before sending the job to
print.
Ghost images
These are possible solutions. Try one or more of the following:
THE PHOTOCONDUCTOR KIT IS DEFECTIVE
Replace the photoconductor kit.
Troubleshooting
201