Lexmark X364dn - Poor Copy Quality; The Toner May Be Low; The Scanner Glass May Be Dirty; The Copy Is Too Light or Too Dark

3 Close the scanner cover.
Poor copy quality
These are some examples of poor copy quality:
• Blank pages
• Checkerboard pattern
• Distorted graphics or pictures
• Missing characters
• Faded print
• Dark print
• Skewed lines
• Smudges
• Streaks
• Unexpected characters
• White lines in print
These are possible solutions. Try one or more of the following:
CHECK THE DISPLAY FOR ERROR MESSAGES
Clear any error messages.
THE TONER MAY BE LOW
When 88 Cartridge low appears or when the print becomes faded, replace the toner cartridge.
THE SCANNER GLASS MAY BE DIRTY
Clean the scanner glass with a clean, lint-free cloth dampened with water. If your printer has an ADF, be sure to
clean the ADF scanner glass as well. For more information, see: “Cleaning the scanner glass” on page 146.
THE COPY IS TOO LIGHT OR TOO DARK
Adjust the copy darkness setting.
Troubleshooting
190