Lexmark X466 Service Manual

Diagnostic aids 3-41
7014-xxx
SE Menu
Note: This is not the Fax SE menu. To enter the Fax SE menu, press **411 from the Ready screen.
Note: This menu should be used as directed by second-level support.
Print SE Menus
General
Copyright - Displays copyright information.
Optra Forms mode - On or off
Code Revision Info
Network Code Level - Displays network code level
Network Compile Info - Displays compile information
Printer Code Level - Displays printer code information
Printer Compile Info - Displays compile information
History
Print History
Mark History
History Mode
MAC
Set Card Speed
LAA
Keep Alive
NVRAM
Dump NVRAM
Re-init NVRAM
NPAP
Print Alerts
TCP/IP
netstat -r
arp -a
Allow SNMP Set
MTU
Meditech Mode
Raw LPR Mode
Gather Debug
Enable Debug

Lexmark X466 Specifications

General

Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, Mac, Linux
Print Technology	Laser
Duplex Printing	Yes
Connectivity	USB, Ethernet
Paper Handling	250-sheet input tray, 50-sheet multipurpose tray
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 1200 dpi
Type	Multifunction
Paper Capacity	300 sheets
Maximum Paper Size	8.5 x 14 inches