Lexmark X5470 - Installing Another Language Control Panel

g Press .
h Press or repeatedly until Never appears.
i Press .
3 To change one or more temporary settings into new default settings:
a Press .
b Press or repeatedly until Tools appears.
c Press .
d Press or repeatedly until Defaults appears.
e Press .
f Press or repeatedly until Set Defaults appears.
g Press .
h Press or repeatedly until Use Current appears.
i Press .
Installing another language control panel
These instructions apply only if you received one or more additional language control panels with the printer.
1 Lift and remove the control panel (if one is installed).
2 Choose the correct control panel for your language.
3 Align the clips on the control panel with the holes on the printer, and then press down.
Setting up the printer
41