7 Use the keypad to enter the number of the photo you want to print.
Use the proof sheet to identify the number of a photo.
Note: If you want to erase or change the number of the photo you entered, press
. This will work if you did
not press
after entering the number of the photo.
8 Press to select a photo.
9 If you want to select additional photos, use the keypad to enter the number of the photo you want to print, and
then press
.
10 Press Start Color or Start Black.
11 Press Start Color or Start Black again.
Using a PictBridge-enabled digital camera to control printing
photos
You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and
print photos.
1 Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2 Insert the other end of the cable into the PictBridge port on the front of the printer.
Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the area
shown while actively printing from a PictBridge-enabled digital camera. A loss of data can occur. Also, do not
remove the USB cable or network adapter while actively printing from a PictBridge-enabled digital camera.
Working with photos
83
To Next Page
Loading...
