Lexmark X652DE - Too Many Flash Options Installed; Too Many Trays Attached; Remove Defective Disk

58 Too many flash options installed
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the excess flash memory.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
58 Too many trays attached
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
59 Incompatible envelope feeder
Try one or more of the following:
• Remove the envelope feeder.
• Touch Continue to clear the message and continue printing without using the envelope feeder.
59 Incompatible output bin <x>
Try one or more of the following:
• Remove the specified output bin.
• Touch Continue to clear the message and continue printing without using the specified output bin.
59 Incompatible tray <x>
Try one or more of the following:
• Remove the specified tray.
• Touch Continue to clear the message and continue printing without using the specified tray.
61 Remove defective disk
Try one or more of the following:
• Touch Continue to clear the message and continue printing.
• Install a different printer hard disk before performing any operations that require a printer hard disk.
Understanding printer messages
248