Version 2.0.0 Page 10
2. The Date and Time screen is displayed.
If setting the time manually: If using a Time Server:
• Set the Time Zone • Set the Time Zone
• Set the Date & Time in the format shown • Leave Set Date & Time blank
• Set DST Mode to Automatic • Set DST Mode to Automatic
• Set Daylight Savings to Yes • Set Daylight Savings to Yes
• Set Time Server to None • Set Time Server to IP
• Leave Time Server Name blank • Set Time Server Name
3. Click Submit.
3.2 TCP/IP Settings
While not explicitly part of the PKI Application Setup, it is a good idea to verify all necessary
TCP/IP Settings are configured.
Pre-Installation
Section 2.3
To Next Page
Loading...
