Lexmark X782 - Editing an Existing Configuration

Version 2.0.0 Page 29
Search Base
Item 8
Authentication
Item 9
MFP Distinquished Name
Item 9
Only Used if Authentication is set to MFP User ID.
MFP Password
Item 9
Only Used if Authentication is set to MFP User ID.
4. Click Apply.
5. Repeat for each custom configuration that needs to be created. A maximum of three
configurations can be created; and each must be named a different configuration.
4.2.2 Editing an Existing Configuration
1. Click the name of the Configuration to be edited.
2. The LDAP Configuration page for that configuration will be displayed.
3. Make any changes and then click Apply.