Lexmark X782 - Certificate Management

Version 2.0.0 Page 19
2. Set the Auto “Log out” delay value.
3. Click Submit.
3.6 Certificate Management
Certificates are needed for SSL support in LDAP lookups and for Domain Controller
verification. All certificates needed by the device must be in PEM (Base64) format and
combined into one file. Since the certificates are in PEM format, they can easily be cut-and-
paste into a single file such as:
-----BEGIN CERTIFICATE-----
MIIE1jCCA76gAwIBAgIQY6sV0KL3tIhBtlr4gHG85zANBgkqhkiG9w0BAQUFADBs
…
l3DTbPe0mnIbTq0iWqKEaVne1vvaDt52iSpEQyevwgUcHD16rFy+sOnCaQ==
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
MIIE1zCCA7+gAwIBAgIQZWAEBZ+h+L5AKmbyl9hgSzANBgkqhkiG9w0BAQUFADBn
…
l3DTbPe0mnIbTq0iWqKEaVne1vvaDt52iSpEQyevwgUcHD16rFy+sOnCaQ==
-----END CERTIFICATE-----
Pre-Installation
Section 3.4.1
Pre-Installation
Sections 2.5
item 3,
3.2.2.1.1, 8.1,
8.2, & 8.3