Version 2.0.0 Page 3
2. Browse to the location of the firmware file. Click Submit. See the table below for
filename that corresponds to your MFP model.
MFP Model Firmware File
X644 and X646 LC2_MC_P254PAh1_full.fls
X85x LC2_BE_P248PAh1_full.fls
X782 LC2_TO_P077PAh1_full.fls
X94x LC_BR_P065PAh1_full.fls
T64x + X4600 LC2_TI_P249PAh1_full.fls
3. The file will take a few minutes to upload and for the MFP to be updated. Wait for the
update to complete and then refresh the web page. NOTE: The MFP should not be
powered off while the update is in progress.
2.2 Smartcard Driver
After the firmware has been updated, the Smartcard Driver compatible with the type of cards
being used must be installed.
1. Bring up the MFP’s web page and click Configuration and then click Embedded
Solutions.
To Next Page
Loading...
