Version 2.0.0 Page 43
2. The Fileshare Configuration page is displayed.
3. Use the following table to configure the settings.
Setting Corresponding Pre-Installation Guide Section/Item
File Share Authorization
Section 6.2 Item 1
Authorization list
Section 6.2 Item 2
Display Name
Section 6.2 Item 3
UNC Path
Section 6.2 Item 4
Replacement Value
If the UNC Path does not have a “%u”, this setting can be
skipped; otherwise, see Section 6.2 Item 5
Replacement Lookup
If the Replacement Value is not LDAP Lookup, this
setting can be skipped; otherwise see Section 6.2 Item 5
LDAP – Replacement Attribute
If the Replacement Value is not LDAP Lookup, this
setting can be skipped; otherwise see Section 6.2 Item 5
Default Filename
Section 6.2 Item 6
Allow User to Rename File
Section 6.2 Item 7
Append Timestamp to Filename
Section 6.2 Item 8
To Next Page
Loading...
