Load manual feeder with <x>
<x> is a paper type or size.
Try one or more of the following:
• Load the specified paper in the multipurpose feeder.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
• Cancel the current job.
Load Manual Feeder with <Custom Type Name>
Try one or more of the following:
• Load the specified paper in the multipurpose feeder.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
• Cancel the current job.
Load Manual Feeder with <Custom String>
Try one or more of the following:
• Load the specified paper in the multipurpose feeder.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
• Cancel the current job.
Load Manual Feeder with <size>
Try one or more of the following:
• Load the specified paper in the multipurpose feeder.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
• Cancel the current job.
Load Manual Feeder with <type> <size>
Try one or more of the following:
• Load the specified paper in the multipurpose feeder.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
• Cancel the current job.
Troubleshooting
221
To Next Page
Loading...
