Lexmark X860DE 3 - Supported Paper Types and Weights

Paper size Dimensions Optional
2,000-sheet dual
input trays
Optional 2,000-sheet
high capacity feeder
Duplex unit
Universal
Note: Turn size
sensing off to
support universal
sizes that are close to
standard media
sizes.
182 x 431 mm
(7.1 x 16.9 in.) to
139.7 x 297 mm
(5.5 x 11.7 in.)
X X X
98.4 x 431.8 mm
(3.8 x 17 in.) to
89 x 297 mm
(3.5 x 11.7 in.) for the
multipurpose feeder
only.
X X X
148 x 431.8 mm
(5.83 x 17 in.) to
140 x 297.2 mm
(5.51 x 11.7 in.) for the
duplex unit only.
X X
7 3/4 Envelope
(Monarch)
98.4 x 190.5 mm
(3.875 x 7.5 in.)
X X X
10 Envelope
104.8 x 241.3 mm
(4.12 x 9.5 in.)
X X X
DL Envelope
110 x 220 mm
(4.33 x 8.66 in.)
X X X
C5 Envelope
162 x 229 mm
(6.38 x 9.01 in.)
X X X
Other Envelope
98.4.7 x 431.8 mm
(3.8 x 17 in.) to
89 x 297 mm
(3.5 x 11.7 in.)
X X X
1
The printer trays cannot distinguish between A5- and statement-size paper when both sizes are loaded in the printer
trays. From the Size Sensing menu, specify which size you want the printer to detect. Load either A5- or statement-size
paper in the paper trays, but not both.
2
This paper size is supported only when the source is non-size sensing or when size sensing is disabled.
3
The printer trays cannot distinguish between B5- and Executive-size paper when both sizes are loaded in the trays. From
the Size Sensing menu, specify which size you want the printer to detect. Load either B5- or Executive-size paper in the
paper trays, but not both.
Supported paper types and weights
The printer engine supports 38–128 g/m
2
(16–32 lb) paper weights.
Note: Labels, transparencies, envelopes, and card stock always print at reduced speed.
Paper and specialty media guidelines
69