Collate
This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. The
factory default setting for Collate is on; the output pages of your copies will be ordered (1,2,3) (1,2,3) (1,2,3). If you
want all the copies of each page to remain together, turn Collate off, and your copies will be ordered (1,1,1) (2,2,2)
(3,3,3).
Options
Touching the Options button opens a screen where you can change Paper Saver, Advanced Imaging, Custom Job,
Separator Sheets, Margin Shift, Edge Erase, Header/Footer, Create Booklet, Overlay, Advanced Duplex, and Save as
Shortcut settings.
Create Booklet
This option creates a sequence of collated output that, when folded or folded and stapled, forms a booklet half the
page size of the original document and with all the pages in order.
Notes:
• Create Booklet is incompatible with Staple, Hole Punch, Margin Shift, and Paper Saver.
• If Create Booklet is on, then turning Margin Shift on will turn off Create Booklet, although the duplex value from
Create Booklet will stay on.
Paper Saver
This option lets you print two or more sheets of an original document together on the same page. Paper Saver is also
called N-up printing. The N stands for Number. For example, 2-up would print two pages of your document on a
single page, and 4-up would print four pages of your document on a single page. Touching Print Page Borders adds
or removes the outline border surrounding the original document pages on the output page.
Advanced Imaging
This option lets you adjust Background Removal, Contrast, Shadow Detail, Scan Edge to Edge, Color Dropout, Auto
Color, Negative Image Sharpness and Mirror Image before you copy the document.
Custom Job
This option combines multiple scanning jobs into a single job.
Note: Custom Job may not be available on all models.
Separator Sheets
This option places a blank piece of paper between copies, pages, and print jobs. The separator sheets can be drawn
from a tray that contains a type or color of paper that is different from the paper your copies are printed on.
Margin Shift
This option increases the size of the margin a specified distance. This can be useful in providing space to bind or hole-
punch copies. Use the increase or decrease arrows to set how much of a margin you want. If the additional margin
is too large, then the copy will be cropped.
Copying
94
To Next Page
Loading...
