Lexmark X860DE 3 - Repeating Defects; Skewed Print; Solid Black or White Streaks Appear on Transparencies or Paper

THE TONER IS LOW
When 88 Cartridge Low appears, order a new toner cartridge.
THE TONER CARTRIDGE MAY BE DEFECTIVE
Replace the toner cartridge.
Repeating defects
These are possible solutions. Try one or more of the following:
Replace the transfer roller if the defects occur every:
58.7 mm (2.31 in.)
Replace the photoconductor if the defects occur every:
44 mm (1.73 in.)
Replace the fuser if the defects occur every:
• 78.5 mm (3.09 in.)
• 94.2 mm (3.71 in.)
Skewed print
CHECK THE PAPER GUIDES
Move the guides in the tray to the correct positions for the paper size loaded.
CHECK THE PAPER
Make sure you are using paper that meets the printer specifications.
Solid black or white streaks appear on transparencies or paper
Troubleshooting
278