EasyManua.ls Logo

Lexmark X860DE 3 - Page 257

Lexmark X860DE 3
309 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 Open the scanner cover, and remove any jammed pages.
8 Close the scanner cover.
9 Touch Continue.
293 paper jam
The printer was sent a scan job, but found no original document in the ADF. Try one or more of the following:
Touch Continue if no scan job is active when the message appears. This clears the message.
Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the
message.
Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the
ADF immediately after the last successfully scanned page.
Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the scanner glass immediately
after the last successfully scanned page.
Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully
scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail,
or FTP.
Touch Restart job if job recovery is active and the job is restartable. The message clears. A new scan job containing
the same parameters as the previous job starts.
Troubleshooting
257

Table of Contents

Other manuals for Lexmark X860DE 3

Related product manuals