Paper size Dimensions Standard 500-sheet trays (Tray
1 and Tray 2)
Multipurpose feeder
JIS B4
257 x 364 mm (10.1 x 14.3 in.)
Letter
215.9 x 279.4 mm (8.5 x 11 in.)
Tabloid
279.4 x 431.8 mm (11 x 17 in.)
Legal
215.9 x 355.6 mm (8.5 x 14 in.)
Executive
3
184.2 x 266.7 mm
(7.25 x 10.5 in.)
Folio
215.9 x 330.2 mm (8.5 x 13 in.)
Universal
Note: Turn size
sensing off to
support universal
sizes that are close to
standard media sizes.
182 x 431 mm (7.1 x 16.9 in.) to
139.7 x 297 mm (5.5 x 11.7 in.)
98.4 x 431.8 mm (3.8 x 17 in.) to
89 x 297 mm (3.5 x 11.7 in.) for
the multipurpose feeder only.
148 x 431.8 mm (5.83 x 17 in.) to
140 x 297.2 mm (5.51 x 11.7 in.)
for the duplex unit only.
7 3/4 Envelope
(Monarch)
98.4 x 190.5 mm (3.875 x 7.5 in.)
X
10 Envelope
104.8 x 241.3 mm (4.12 x 9.5 in.)
X
DL Envelope
110 x 220 mm (4.33 x 8.66 in.)
X
C5 Envelope
162 x 229 mm (6.38 x 9.01 in.)
X
Other Envelope
98.4.7 x 431.8 mm (3.8 x 17 in.)
to 89 x 297 mm (3.5 x 11.7 in.)
X
1
The printer trays cannot distinguish between A5- and statement-size paper when both sizes are loaded in the printer
trays. From the Size Sensing menu, specify which size you want the printer to detect. Load either A5- or statement-size
paper in the paper trays, but not both.
2
This paper size is supported only when the source is non-size sensing or when size sensing is disabled.
3
The printer trays cannot distinguish between B5- and Executive-size paper when both sizes are loaded in the trays. From
the Size Sensing menu, specify which size you want the printer to detect. Load either B5- or Executive-size paper in the
paper trays, but not both.
Paper and specialty media guidelines
67
To Next Page
Loading...
