Lexmark X860DE 3 - Page 82

Finisher Bin 2 finishing features
Size
Two-hole punch
*
Three- or
Four-hole punch
Offset Single staple Dual staple
A3
A4
Note: Supported
only if feeding
orientation is long
edge.
Note: Supported
only if feeding
orientation is long
edge.
A5 X X X X X
Executive
Folio X
JIS B4
JIS B5
Legal X
Letter
Note: Supported
only if feeding
orientation is long
edge.
Note: Supported
only if feeding
orientation is long
edge.
Statement X X X X
Tabloid
Universal X X
Envelopes (any
size)
X X X X X
Oficio X
*
For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3-hole punch and 10 in. (254 mm)
for a 4-hole punch.
Punch—Two-, three-, or four-hole punch settings
Single staple—One staple
Dual staple—Two staples
Finisher Bin 3
Bin 3 is available only when the booklet finisher is installed. The paper capacity of Bin 3 (booklet-maker) is 1,500
sheets or 18 sets of 15-page booklets.
Printing
82