What happens if I use a non-Lexmark supply in my Lexmark Printer?
If you are using a non-genuine supply or part in your Lexmark printer, you can proceed by pressing and holding the # button on the printer control panel simultaneously for 15 seconds to accept the risks. If you do not wish to accept these risks, remove the third-party supply or part and install a genuine Lexmark supply or part.
How to clear 'Remove paper from standard output bin' message on Lexmark Printer?
To clear the 'Remove paper from standard output bin' message on your Lexmark printer, remove the paper stack from the standard bin. The printer should automatically detect the removal and resume printing. If the message persists, select Continue on the printer control panel.
What to do if Lexmark XM1140 Printer prints 'Complex page, some data may not have printed'?
If your Lexmark printer displays 'Complex page, some data may not have printed', you can select Continue on the printer control panel to ignore the message and continue printing. Alternatively, you can cancel the current print job or install additional printer memory.
What to do if Lexmark XM1140 says 'Printer had to restart'?
If your Lexmark printer displays the message 'Printer had to restart. Last job may be incomplete,' touch the screen to clear the message and continue printing.
What to do if Lexmark XM1140 Printer shows 'Defective flash detected'?
If your Lexmark printer displays the message 'Defective flash detected', you can replace the defective flash memory card. Alternatively, you can select Continue on the printer control panel to ignore the message and continue printing, or cancel the current print job.
What to do if Lexmark XM1140 Printer scanner is disabled?
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Time to first page (black, normal) | 6.5 s |
| Print speed (black, normal quality, A4/US Letter) | 38 ppm |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | - DPI |
| Copy speed (black, normal quality, A4) | 38 cpm |
| Scanner type | Flatbed scanner |
| Maximum scan area | A4 (210 x 297) mm |
| Scan speed (black) | 8 inch/min |
| Scan speed (color) | 18 inch/min |
| Duplex scan speed (black) | 42 ppm |
| Duplex scan speed (color) | 19 ppm |
| Optical scanning resolution | 600 x 1200 DPI |
| Faxing | Mono faxing |
| Modem speed | 33.6 Kbit/s |
| Digital sender | - |
| Maximum duty cycle | 80000 pages per month |
| Recommended duty cycle | 750 - 10000 pages per month |
| Processor cores | 2 |
| Processor frequency | 800 MHz |
| Maximum internal memory | 2560 MB |
| Sound pressure level (copying) | 55 dB |
| Paper input type | Paper tray |
| Total input capacity | 300 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 850 sheets |
| Multi-Purpose tray input capacity | 50 sheets |
| Envelopes sizes | 7 3/4, 9, 10, DL |
| Maximum print size | 216 x 297 mm |
| Paper tray media types | Card stock, Envelopes, Labels, Plain paper, Transparencies |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Control type | Touch |
| Product color | Black, White |
| Display diagonal | 4.3 \ |
| Market positioning | Business |
| Wi-Fi | No |
| Mobile printing technologies | Not supported |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Parallel, Serial (RS-232), Wireless LAN |
| USB 2.0 ports quantity | 3 |
| Power consumption (average operating) | - W |
| Sustainability certificates | ENERGY STAR |
| Operating altitude | 0 - 2896 m |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
Weight and Dimensions| Depth | 339 mm |
|---|---|
| Width | 472 mm |
| Height | 468 mm |
To Next Page
