143
4-2. Driving procedures
4
Driving
■ Turn signals can be operated when
The engine switch is in IGNITION ON
mode.
■ If the indicator flashes faster than usual
Check that a light bulb in the front or rear
turn signal lights has not burned out.
■ If the turn signals stop flashing before a
lane change has been performed
Operate the lever again.
■ Customization
Some functions can be customized.
(P.394)
■ Using the manual mode
The parking brake can be set and
released manually.
U.S.A.
Canada
1 Push the switch to set the parking
brake
The parking brake indicator light will turn
Parking brake
The parking brake can be set or
released automatically or manually.
In automatic mode, the parking
brake can be set or released auto-
matically according to the shift
lever operation. Also, even in auto-
matic mode, the parking brake can
be set or released manually.
Operating instructions
To Next Page
Loading...
