Lexus is300 2021 - Meter Display Settings that Can be Changed; Settings Display; Suspension of the Settings Display

82
2-1. Instrument cluster
■ Meter display settings that can be
changed
 Language
Select to change the language displayed.
 Units
Select to change the units of measure dis-
played.
 Speedometer display (except F
SPORT models)
Select to set the display of the speedome-
ter to digital/analog/both digital and ana-
log.
 Drive information 1/Drive informa-
tion 2/Drive information 3
Select to select up to 2 items (P.79) that
will be displayed on each Drive information
screen (Drive information 1 screen, Drive
information 2 screen and Drive informa-
tion 3 screen) respectively.
 Clock
Select to switch between 12-hour display
and 24-hour display.
 Pop-up display
Select to enable/disable pop-up displays
for each relevant system.
 Accent color
Select to change the accent color on the
screen, such as the cursor color.
 Rev indicator (F SPORT models)
• Select to enable/disable the rev indica-
tor.
• Select to set the engine speed at which
the rev indicator (amber) will begin to be
displayed.
 Rev peak (F SPORT models)
Select to enable/disable the rev peak.
 Eco Driving Indicator Light
Select to enable/disable the Eco Driving
Indicator Light.
 Default setting
Select to reset the meter display settings to
the default setting.
■ Vehicle functions and settings that
can be changed
P.394
■ Suspension of the settings display
● Some settings cannot be changed while
driving. When changing settings, park
the vehicle in a safe place.
● If a warning message is displayed, opera-
tion of the settings display will be sus-
pended.
Settings display
WARNING
■ Cautions during setting up the dis-
play
As the engine needs to be running
during setting up the display, ensure that
the vehicle is parked in a place with ade-
quate ventilation. In a closed area such as
a garage, exhaust gases including harm-
ful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to
death or a serious health hazard.
NOTICE
■ During setting up the display
To prevent battery discharge, ensure that
the engine is running while setting up the
display features.