334
7-2. Steps to take in an emergency
3 Insert the towing eyelet into the
hole and tighten partially by hand.
4 Tighten down the towing eyelet
securely using a wheel bolt wrench
or hard metal bar.
5 Securely attach cables or chains to
the towing eyelet.
Take care not to damage the vehicle body.
6 Enter the vehicle being towed and
start the engine.
If the engine does not start, turn the engine
switch to IGNITION ON mode.
7 Shift the shift lever to N and release
the parking brake.
Turn automatic mode off. (P.144)
When the shift lever cannot be shifted:
P.139
■ While towing
If the engine is not running, the power assist
for the brakes and steering will not function,
making steering and braking more difficult.
■ Wheel bolt wrench
Wheel bolt wrench is installed in the trunk.
(P.349)
To Next Page
Loading...
