Lexus NX 200t User Manual

477
6-4. Other interior features
6
Interior features
NX200t_OM_USA_OM78145U
■ Programming a rolling code system
Locate the “Learn” or “Smart”
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire is
attached to the unit. The name and
color of the button may vary by man-
ufacturer. Refer to the Owner’s man-
ual supplied with the garage door
opener motor for details.
Press and release the “Learn” or
“Smart” button.
Perform within 30 seconds
after performing .
Press and hold the desired
HomeLink
®
button (inside the
vehicle) for 2 seconds and
release it. Repeat this sequence
(press/hold/release) up to 3
times to complete programming.
If the garage door opener motor
operates when the HomeLink
®
but-
ton is pressed, the garage door
opener motor recognizes the Home-
Link
®
signal.
1
2
3
2
3

Lexus NX 200t Specifications

General

Brand	Lexus
Model	NX 200t
Category	Automobile
Language	English