■ Hands free close & lock (walk away) function operating conditions
This function can be operated when all of the following conditions are met:
● The hands free close & lock function setting is on.
● The Hands Free Power Back Door operating conditions are met.
● An electronic key is not detected within the vehicle.
● All of the doors other than the power back door are closed.
● The brake pedal is not depressed.
● The power switch is off.
■ Situations in which the close & lock (walk away) function may not operate properly
In the following situations, the close & lock function may not operate properly:
● If the
switch on the lower part of the power back door is pressed by a hand which
is holding an electronic key
● If the
switch on the lower part of the power back door is pressed when the
electronic key is in a bag, etc. that is placed on the ground
● If the switch on the lower part of the power back door is pressed with the
electronic key not near the vehicle
Closing the back door and lock all of the doors
1 Perform the following procedure with no electronic keys for this vehicle inside
the vehicle. When the power back door is closed, all of the doors will lock.
Using the switch:
2 While carrying an electronic key, press the switch on the lower part of the
power back door.
When you move away from the power back door, it will automatically fully close.
If the power back door is approached while carrying an electronic key, the closing
operation will stop.
1-5. Entering/exiting the vehicle and loading luggage
139
1
Before driving
To Next Page
Loading...
