locked again and the alarm will automatically be set.)In a case that the alarm is
triggered, immediately stop the alarm.
Operations using the wireless remote control
Lock/unlock the doors using wireless remote control
1 Locks all the doors
Check that the door is securely locked.
2 Unlocks all the doors
Using the door lock switches
Locking/unlocking the doors with the door lock switches
1
Press the switch.
All of the doors will lock.
The indicator comes on.
2
Press the switch.
All of the doors will unlock.
The indicator turns off.
Close & lock (walk away) function
When the power back door is open, all of the doors will be locked when the power
back door is closed.
INFORMATION
■ Close & lock (walk away) function operating conditions
This function can be operated when all of the following conditions are met:
● An electronic key is not detected within the vehicle.
● All of the doors other than the power back door are closed.
● The brake pedal is not depressed.
● The power switch is off.
1-5. Entering/exiting the vehicle and loading luggage
138
To Next Page
Loading...
