Using the entry function: Touch the sensor area on the outside door handle twice
within 5 seconds.
Using the wireless remote control: Press twice within 5 seconds.
The double locking system will be set.
Canceling the double locking system
Using the entry function: Hold the outside door handle, press the power back
doorswitch or move your foot under the center of the rear bumper.
Using the wireless remote control: Press .
Setting the alarm system
*
Make sure of the following before setting the alarm:
●
Nobody is in the vehicle.
●
The windows and moon roof are closed before the alarm is set.
●
No valuables or other personal items are left in the vehicle.
NOTICE
Do not modify or remove the system. If modified or removed, the proper operation of the
system cannot be guaranteed.
Close the doors and hood, and lock all the doors
using the entry function or wireless remote con-
trol. The system will be set automatically after 30
seconds.
The indicator light changes from being on to flashing
when the system is set.
If all doors are closed with hood open, alarm system
can be set.
Canceling/stopping the alarm system
Do one of the following to deactivate or stop the alarms:
● Unlock the doors using the entry function or wireless remote control.
● Start the hybrid system.
The alarm will be deactivated or stopped after a few seconds.
* :
If equipped
1-5. Entering/exiting the vehicle and loading luggage
143
1
Before driving
To Next Page
Loading...
